background image

 

Instruction Manual 

PT5200  

FM Portable Radio 

 
We are very grateful for your purchasing 

 two-way radios produced by Kirisun 

Electronics (Shenzhen) Co., Ltd. 

  two-way radio always incorporates the latest technology. The quality and function of 

the 

  two-way radio can meet your demands for reliable communication. 

 
 

Notice to the User: 

·

  Please read this instruction manual before operating this radio.   

·

  It’s prohibited to use the radio or charge it at any area with a potentially explosive atmosphere 

(where the air contains gas, dust and smog, etc.), such as while taking on fuel, or while 
parking at a gasoline service station; or any area where radio communication is prohibited 
(such as a hospital or a airport.) 

·

  It’s prohibited to operate the radio without permission at the areas where the government laws 

prohibit radio communication. 

·

  Please don't expose the radio to direct sunlight for a long time; don't place the radio near any 

heating devices, either. 

·

  Please don't put the radio in extremely dusty, moist or dabbling places; don’t place it on any 

unstable surfaces, either.

 

   

·

  If you want to develop or remodify the radio   

·

 Refer service to the well-trained professional technicians only and do not disassemble or 

assemble the radio. 

 
 
 

Kirisun Electronics (Shenzhen) Co., Ltd   

 

 

 

 

 

 

 

 

 

 

Summary of Contents for PT5200


















Reviews: