background image

FOREWORD

 

Make sure to read this manual carefully and keep it handy for future reference.

 

When leasing or transferring this tractor, deliver this manual together with the tractor.

 

The specifications in this manual are subject to change without notice.

< NOTE >

Congratulations, and welcome to the fabulous world of 

NX4520  /  NX5020  /  NX5520  /  NX6020

  ownership, 

where serious work is made fun again! 

This versatile tractor is a culmination of the entire tractor and diesel engine knowledge gained by the 

Dae-

dong  Industrial  Co.,LTD

  over  the  years  since  1947. The 

NX4520  /  NX5020  /  NX5520  /  NX6020 

and  has 

been designed with the finest materials and under rigid quality control standards  set forth by the 

KIOTI

 En-

gineering Department.

Knowledge of tractor operation is essential for many years of dependable service and reliability. To help new 

owner's familiarize themselves with the 

KIOTI NX4520 / NX5020 / NX5520 / NX6020

, it is the policy of 

KIO-

TI

 tractor to provide an owner's manual which includes helpful information about tractor safety, operation and 

maintenance. If the information you seek is not found in this manual, your 

KIOTI

 tractor dealer will be happy 

to help you. 

Please feel free to contact 

DAEDONG IND. CO.,LTD

 with your questions/concerns. 

TE130(NX4520,5020,5520,6020)-합본-1   1

2016-02-22   오전 8:20:32

Summary of Contents for NX4520







































































































































































































































































Reviews: