QUEST
™
VQ4100 Quick Reference Guide
Pointing the handle approximately north
may speed up scan time, but is not
required for a successsful search.
ANTENNA
UNIT
OBSTRUCTIONS
SATELLITES
IN SOUTHERN SKY
KC1172
IMPORTANT!
Antenna unit must have a clear view
of the southern sky. Any tall objects
can block the signal from reaching
the antenna.
2
Place antenna unit in a location to scan for satellites.
Place the antenna unit on a stable and reasonably level surface with a clear view of the southern sky.
Be sure surface is dry and free of loose dirt or sand.
Lay the unit on a soft,
non-scratching surface
and apply the (3) rubber feet.
If enabling the alarm,
apply the included sticker
(see on-line owner’s manual).
1
Do not apply rubber feet if you will be roof-mounting the antenna unit.
LED
Button
Receivers sold separately
Coax sold separately
AUX
MAIN
110 AC/DC
Power Supply
To TV
To TV
110 VAC
KING Power Inserter
ANT
REC
SAT IN
KC1357
Optional AUX Receiver
110 VAC
SAT IN
Main Receiver
3
Connect components.
Use only the power inserter that came with this product.
Power inserter is for indoor use only.
Place the power inserter in an accessible location.
Do not over-tighten the coax connections.
Do not put sharp bends or kinks in the cables.
Do not route the cables where they can be tripped on
or run over by a vehicle.
Optional second receiver shown.
4
Switch Type
: Multi-switch
Dish Type
: 3-LNB (18”x20”) or 18x20” Triple-sat LNB
Make this one-time setting in the receiver’s satellite setup menu.
Make sure your TV is on the correct input from your receiver.
If your receiver screen does not appear on your TV, check TV input by
pressing Source/Input button located on your TV or TV’s remote.
&RQ¿JXUH\RXUUHFHLYHUDVIROORZV
5(&(,9(56++525+,*+(5
See on-line owner’s manual for connections.
For use with DIRECTV
®
satellite programming
