910 East Orangefair Ln. Anaheim, CA 92801
Tel. (714) 992-6990
Fax. (714) 992-0471
www.anaheimautomation.com
Kinco VFD CV100 Quick Start Guide
Kinco VFD CV100 Quick Start Guide
BASIC FUNCTIONS
This guide wil familiarize the user with the basic functions of the CV100
Varible Frequency Drive (VFD) and assist with start up. The guide will cover
the following:
Restoring Parameters to Default
Set Speed in Digital Mode
Control Direction and Run/Stop
Connect 3 Phase AC Motor Wires to CV100-2S Motor Terminals
U (T1)
V (T2)
W (T3)
Connect Single Phase 220 VAC Power to CV100-2S Power Terminals
L (L1)
N (L2)
≡
Power on VFD
Upon initial start-up, the frequency on display should be flashing
1. Restore VFD to Factory Default. Go to B4.03
B4.03
Note: This function is used to return ALL the parameter values back to default
1. Press MENU
2. Press SHIFT, press ˄ 1 time. (B) should be displayed
3. Press SHIFT, press ˄ 4 times, (4) should be displayed
4. Press SHIFT twice, Press ˄ 3 time, (3) should be displayed
5. Press ENTER
6.Press ˄ 2 times, (2) should be displayed, press ENTER
2= Factory Default
7. A0.01 Should be displayed
A0.01
L011153
