KidKraft GREYSTONE COTTAGE Installation And Operating Instructions Manual Download | Manualshive

Page: 1 / 52

background image

INSTALLATION AND OPERATING INSTRUCTIONS

GREYSTONE
COTTAGE
PLAYHOUSE
P280093

Rev 07/29/2020

Table of Contents

Warnings and Safe Play Instructions  .  .  .  .  .  .  .  .  .  . pg . 2
Instructions for Proper Maintenance   .  .  .  .  .  .  .  .  . pg . 2
Keys to Assembly Success   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . pg . 3
About Our Wood – Limited Warranty  .  .  .  .  .  .  .  .  . pg . 4
Battery Instruction and Warranty   .  .  .  .  .  .  .  .  .  .  .  . pg . 5
Keys to Quick Assembly   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . pg . 6
Part ID   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . pg . 9
Step-By-Step Instructions   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .pg . 14
Installation of ID/Warning Plaque  .  .  .  .  .  .  .  .  .  .  .pg . 50

To reduce the risk of serious injury or death, you must read and follow these instructions.

Keep and refer to these instructions often and give them to any future owner of this play set.

Manufacturer contact information provided below.

OBSTACLE FREE SAFETY ZONE - 19’ 1/8” x 16’ 3/4” (5.8 x 5.1m)

CAPACITY - 5 Users Maximum, Ages 2 to 10.

RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries, day cares or parks.

WARNING - Only for domestic use.

WARNING

2

2-4 Hrs

10 - 12 Hrs

FOR FORT & SWING

TWO PERSON

ASSEMBLY

10 - 12 Hrs

FOR FORT & SWING

3 - 5 Hrs

1.1m

5.8m

5.1m

1.8m

FOR OUTDOOR FAMILY DOMESTIC USE ONLY

KidKraft, Inc.

4630 Olin Road

Dallas, Texas 75244 USA

[email protected]

[email protected]

1.800.933.0771

972.385.0100

For online parts replacement visit

https://parts.kidkraft.com/

KidKraft Netherlands BV

Olympisch Stadion 8

1076 DE Amsterdam

The Netherlands

[email protected]

+31 20 305 8620 M-F from 09:00 to 17:30

(GMT+1)

For online parts replacement visit

https://parts.kidkraft.eu/

1
2
3
...
»

Summary of Contents for GREYSTONE COTTAGE





















































Reviews:

No comments

Related manuals for GREYSTONE COTTAGE

Brand: MacDon Pages: 89

Brand: Yates Pages: 2

4 Happy Kids GUCIO

Brand: 4iQ Pages: 12

Brand: 4EVAC Pages: 27

Brand: Farmet Pages: 102

Brand: R&S Pages: 2677

Brand: TATU Pages: 30

Brand: Rane Pages: 4

Brand: Sabio Pages: 182

Brand: SaMASZ Pages: 25

Brand: Scanlab Pages: 39

Brand: Eagle Pages: 38

Brand: ACE INSTRUMENTS Pages: 27

assistina MB-300

Brand: W&H Pages: 58

Brand: U'King Pages: 4

Brand: Bomedent Pages: 28

Tilloll 875 Series

Brand: Landoll Pages: 64

Easy Access Stairs R5

Brand: Playcraft Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands