RETAIL WINCH DISPLAY
Display
PART # 110465
Hardware Kit: HK-073
Kit Components:
Qty. Part Description
1................. Winch Display Plate
1................. Binder Display Bracket
2................. Zip Tie
4................. Spacer
4................. M8-1.25 x 45mm Bolt
2................. 1/4”-20 x 1/2” Slotted Screw
2................. 1/4” Nylock Nut
INSTALLATION INSTRUCTIONS:
1. Assemble the roller fairlead to the fairlead bracket using the
items included in your winch box. (See Figures 1&4)
2. Assemble winch to display using the supplied longer M8
bolts and spacers, see Figure 2, use washers and lock
washers supplied with winch if needed.
3. Install mini-rocker switch using hardware provided with
your winch. (See Figure 2) When installing the mini-rocker
place the other half of the handle bar bracket to the back
side.
4. Install binder display bracket using the 1/4” screws and nuts
provided in the kit. (See Figure 3)
“Figure 2” Winch Install
“Figure 1”
©2012 Copyright Kappers Fabricating, Inc. All rights reserved
“Figure 3” Binder Display Bracket Install
1.
