![background image](http://html.mh-extra.com/html/kenmore/66515751791/66515751791_installation-instructions-manual_183387001.webp)
Installation
Instructions
Built-In
Dishwasher
If you have questions,
call 1-800-4-MY-HOME
®
(1-800-469-4663) or visit our website at:
www.sears.com
IMPORTANT
–
The dishwasher MUST
be installed to allow for future removal from the enclosure if
service is required.
If you received a damaged dishwasher, you should immediately
contact your dealer or builder.
Optional Accessories –
See the Owner’s Manual for
available custom panel kits.
FOR YOUR SAFETY
Read and observe all CAUTIONS and WARNINGS
shown throughout these instructions. While
performing installations described in this booklet,
gloves, safety glasses or goggles should be worn.
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
IMPORTANT
–
Observe all governing
codes and ordinances.
•
Note to Installer –
Be sure to leave these instructions for
the consumer's and local inspector's use.
•
Note to Consumer –
Keep these instructions with your
Owner’s Manual for future reference.
•
Skill Level –
Installation of this dishwasher requires basic
mechanical and electrical skills.
Proper installation is the
responsibility of the installer. Product failure due to
improper installation is not covered under the
SEARS Appliance Warranty.
•
Completion Time – 1 to 3 Hours.
New installations require
more time than replacement installations.
WARNING
To reduce the risk of electrical shock, fire, or
injury to persons, the installer must ensure that
the dishwasher is completely enclosed at the
time of installation.
READ CAREFULLY.
KEEP THESE INSTRUCTIONS.