![background image](http://html1.mh-extra.com/html/kenall/luxtran-kb510-series/luxtran-kb510-series_installation-instructions_663630001.webp)
www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
1
INSTALLATION INSTRUCTIONS
KB510_F-6222_091118
Luminaires for Tunnel Applications
LUXTRAN
™
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should always be followed, including the following:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS
INVOLVED. CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTALLATION PERTINENT, PAR UNE
PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES
INHÉRENTS.
DISCONNECT POWER TO ALL CIRCUITS BEFORE WIRING FIXTURE. INSTALL IN ACCORDANCE WITH ALL NATIONAL,
STATE, AND LOCAL CODES. DO NOT CONNECT TO AN UNGROUNDED SUPPLY. READ ALL FIXTURE MARKINGS AND LABELS TO
ENSURE CORRECT INSTALLATION OF FIXTURE. SUPPLEMENTAL INSTRUCTIONS MAY BE LOCATED ON THE FIXTURE, IN ADDITION
TO THIS INSTRUCTION SHEET, REGARDING ORIENTATION, OR MOUNTING RESTRICTIONS.
SAVE THESE INSTRUCTIONS
KB510 SERIES
1. Attach input leads to fixture as shown in Fig.1 for 24VDC input or for 120-277VAC input.
2. Mount fixture over recessed wiring box tucking wiring into wiring box.
3. Secure to wall over bolts and secure with nuts or using screws (mounting hardware by others).
INSTALLATION
SERVICE
Before beginning any service operation, be sure the power to the fixture is off.
5.05"
9.90" 8.50"
2.53"
ø .44"
Wire Spec:
24VDC: 14 AWG LSZH
Wire (Red, Black, Green)
DV: 18 AWG LSZH Wire
(Black, White, Green)
2.63"
Connect:
For 24DC Fixture-
Red to (+) 24VDC
Black to (-) 24VDC
Green to Ground
For 120-277VAC Fixture-
Black to 120-277VAC
White to Neutral
Green to Ground