KELMAR DCMP-2, Instructions

Page: 1 / 5

Systems Inc., 284 Broadway, Huntington Station, NY 11746 • 631.421.1230 • FAX 631.421.1274
DCMP-2 Video Projector Pedestal Instructions
Before proceeding please read all of the instructions
Proper installation is the sole responsibility of the installer
Tools required:
3/8” Drive Ratchet with 3” Extension
1/2” and 9/16” Sockets
9/16” Open End Box Wrench
5/8” Open End Box Wrench
5/32” Allen Wrench (supplied)
#2 Phillips Screwdriver
Electric Drill with 3/8” Hex Driver Bit
2 Foot Level for leveling the platform
Hammer Drill with 3/8” Masonry Bit for securing Rear
Leg Support Brackets to floor.
Main Components:
(1) Rear Leg Assembly
(1) Front Leg Assembly
(2) Front to Rear Leg Cross Braces
(2) Rear Leg Support/ Adjust Bracket
(2) Leveling Pads
(1) Main Mounting Platform
(4) Projector Hold Down Brackets
(2) 10-RU Equipment Mounting Rails
Assembly Hardware:
(22) 1/4-20 Anti-vibration Nylock Nuts
(6) 3/8-16 Anti-vibration Nylock Nuts
(28) 1/4” Internal Tooth Lock Washers
(12) 3/8” Internal Tooth Lock Washers
(2) 3/8” Internal / External Tooth Lock Washers
(4) 3/8-16 x 3-1/2” Hex Bolts
(2) 3/8-16 x 2-1/4” Hex Bolts
(4) 1/4-20 x 3/8” Allen Button Head Screw
(6) 1/4-20 x 2” Allen Button Head Screws
(4) 1/4-14 x 3/4” Self-drilling and Tapping Hex Head Screw
(2) 3/8” Masonry Fasteners
(20) 10-32 x 3/4” Equipment Mounting Screws
(10) Large Tie Wraps
(1) 5/32 Allen Wrench