KegLand Distribution PTY LTD
www.KegLand.com.au |
| +61 3 90187935
Bottle Filler Beer Gun
Instruction and Service Manual
Kegging and kegged beer is simply awesome but anyone with kegs will eventually face the problem that it’s difficult to
transport your kegged beer to your mates house or BBQ. In the past bottling either involved complicated counter-
pressure fillers or putting up with oxygenation and foaming when filling from a tap. The Bottle Filler Beer Gun solves
this problem with quality design, expert engineering and intuitive ease of use.
The Bottle Filler Beer Gun saves you the time consuming operation and cleaning of traditional counter pressure bottle
fillers while still maintaining two primary functions:
1. Purging a bottle with CO2 (no oxygen pickup)
2. Filling the bottle with little or no loss of carbonation
As well as fulfilling these two objectives the Bottle Filler Beer Gun is compatible with a wide range of bottles of varying
height and neck design.
Foaming can generally be caused by turbulence and sudden changes in pressure. The Bottle Filler Beer gun
eliminates the need to pressurise the bottle by using is low turbulence beer-delivery system. Some other competitors
place their valve at the top of the filler, which forces the beer down an empty tube each time, kicking up foam along the
way. Placing the valve at the bottom not only quickly immerses the valve in the beer but further reduces pressure
change and turbulence, keeping the stem full of beer at all times. And because the beer is sealed in the filler stem
when the Bottle Filler Beer Gun is removed from the bottle, it automatically provides a consistent bottle fill level.
