92798 Cape Arago Hwy, Coos Bay, OR 97420 | 541-888-3517 | Toll Free 1-800-867-6863 | kksound.com
U L T R A PU R E PR E A M P
Overview photo: UltraPure Mini System, installed in a steel string flattop guitar
Package Contents
•
Pure Pickup, with accessories & manual
•
UltraPure preamp with battery clip cable
•
Battery bag
•
Allen wrench
•
Output cable with endpin jack
•
3 cable clamps with adhesive backing: 1 big, 2
small
•
Cable tie
You Need
•
9-volt battery
•
Any materials required for the pickup
installation (see Pure Pickup manual)
UNPLUG THE CABLE FROM THE ENDPIN JACK TO
SWITCH OFF THE BATTERY. USE A SHIELDED
STANDARD MONO
¼
” GUITAR CABLE ONLY.
This sound hole mounted UltraPure Preamp features
the same EQ and phase switch circuitry as our Pure
XLR Preamp, without the XLR output and with
components that are optimized for longer battery
life. It has a
¼
” endpin jack line output.
Features
•
Volume control slider
•
Proprietary K&K 3-band EQ with +/-20dB Bass,
Mid and Treble controls
•
K&K’s extra wide band midrange filter,
especially geared towards acoustic guitar
•
Phase switch: flips the phase 180 degrees if
pressed in
•
Low battery indication light: comes on at about
6.5-volt operating voltage. There will be at least
3-4 hours playing time left.
•
Adjustable input gain: a small blue trim pot on
the bottom of the preamp
