Instruction Manual
K C M 3 5 0
20. AC CONNECTION
21. RCA MASTER OUTPUTS -
Left & Right line level Unbalanced RCA
22. RCA BOOTH OUTPUTS -
Left & Right line level Unbalanced RCA
23. REC OUT -
Left & Right line level Unbalanced RCA connectors. The Record Out (REC
OUT) level is dictated by the CHANNEL FADER LEVEL (8), it is not influenced by the
MASTER VOLUME CONTROL (16).
24. DEDICATED LINE INPUTS -
Channels 1, 2, 3 & 4 each feature a dedicated, stereo,
unbalanced RCA audio input suitable for use only with devices like CD, Video & Tape
players which produce a ‘line level’ signal
.
25. SWITCHABLE PHONO/LINE INPUTS -
Channels 2, 3 & 4 each feature a stereo RCA
input which can be switched between ‘line level’ and ‘phono level’ operation via the INPUT
SELECTION SWITCHES (26).
PHONO inputs are designed for use only with turntables
which produce a low voltage 'phono' level signal.
26. INPUT SELECTION SWITCHES -
used to set signal input type for channels 2,3 & 4.
27. GROUND TERMINALS -
Connect each of your turntable ground leads to either
of the three ground terminals.
REAR PANEL CONNECTIONS
SPECIFICATIONS
INPUT Mic
2mV / 3k Ohm :
Phono
3mV / 47 Kohm :
Line
200mV / 47 Kohm
OUTPUT Amp
1V /1k Ohm :
Rec
400mV / 1k Ohm
Headphone
>8 Ohm stereo
FREQUENCY RANGE
25Hz~20KHz
Channel EQ
-26dB /+12dB
THD
0.05% -:-
S/N RATIO
78dB
POWER SUPPLY
Internal
DIMENSIONS
373 x 295 x 90mm -:- WEIGHT
5 Kgs
Due to continuous product development, specifications are subject to change.
when this product is no longer functional take it to a recycling plant for envirnmentally friendly disposal
