KAM DDX750
DIRECT DRIVE TURNTABLE
INSTRUCTION MANUAL
KAM DDX750
DIRECT DRIVE TURNT
ABLE
OPERATING INSTRUCTIONS
1. Turn the power button/strobe clockwise to turn on
the power, the speed indicator and the strobe
illuminator will light up.
2. Place a record on the slipmat. When playing a
45rpm record with a large centre hole, put the
45rpm adaptor on the centre spindle.
3. Set the speed to match the record.
4. Remove the stylus protector and release the
tonearm clamp.
5. Set the cueing lever to the up position.
6. Press the Start/Stop button, the turntable platter
will start to rotate.
7. Move the tonearm over the desired groove.
8. Set the cueing lever to the down position, the
tonearm will descend slowly onto the record and play
will begin.
9. When play is finished, raise the cueing lever, move
the tonearm to the arm rest and secure the tonearm
will the arm clamp.
10. Press the Start/Stop button to stop the platter
rotating. Turn the power button anti-clockwise to turn
off the power.
To suspend play, set the cueing lever to the up
position during play. The stylus tip of the cartridge will
be lifted from the record.
q
45rpm ADAPTOR
w
KAM SLIPMAT
e
CENTRE SPINDLE
r
STROBE DOTS
t
POWER SWITCH / STROBE
y
START / STOP BUTTON
u
HEADSHELL
i
SPEED SELECT BUTTON
o
PITCH CONTROL SLIDER
1)
TONEARM
1!
ANTI-SKATING KNOB
1@
COUNTERWEIGHT
1#
POSITION FOR PREPARING CARTRIDGE
1$
SEARCHLIGHT
© COPYRIGHT LAMBA plc 2003. E&O E.
OVERVIEW
The KAM DDX750 turntable is
designed to give the DANCE DJ,
MOBILE DJ, PUBLIC HOUSE AND
SMALL CLUB INSTALLATION
maximum flexibility and features
for minimum cost. This turntable
combines all the features required
while maintaining a high level of
build quality and specification.
The turntable comes
complete with:
1 x headshell
1 x 45rpm adaptor
1 x counterweight
1 x platter
1 x cartridge
1 x connecting cable
1 x searchlight
1 x Kam slipmat
and this manual.
SPECIFICATION
Turntable
Type
2 speed full manual
Motor
DC motor
Drive method
Direct drive
Platter
330mm aluminium
Speeds
33.3rpm + 45rpm
Wow & flutter
Less than 0.15 WRMS
S/N ratio
More than 50dB
Pitch controls
±10%
Start time
Less than 1 sec
Speed change
Less than 1 sec
Speed tolerance
Within ±1.3%
High of cue
(first track)
6-10mm
Descend of cue
5 sec
Tonearm
Type
Static S shaped
Length
220mm
Overhang
10mm
Tracking error
Less than 3 degree
Tracking adjustment
3-4g
Cartridge weight
6-10g
Anti skating range
0-4g
Cartridge tracking force
0-4g
General
Power supply
AC 240V, 50Hz
Power consumption
9 Watts
Dimensions
450 x 350 x 139mm
Weight
4.68Kgs
Due to continuous product development, specifications are subject to change.
q
w
e
r
t
y
u
i
o
1)
1!
1@
1#
1$
