Questions? Problems? For additional assistance, please contact Kallista's Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
INSTALLATION INSTRUCTIONS
1085230-2-A
Page 1 of 2
P71040
Tape
Measure
Pencil
Drill
Safety
Glasses
Adjustable
Wrench
Level
Plus:
•
3/16” Drill Bit
•
3/8” Shut-Off Valves
Persephone 3-Hole Bidet
1. PREPARATION
THANK YOU FOR CHOOSING KALLISTA
BEFORE YOU BEGIN
TOOLS AND MATERIALS
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual before
you install your Kallista product. If you encounter any installation or performance problems, please do not
hesitate to contact us at the phone number listed at the bottom of the page.
Turn the water supply off.
Install the hot and cold water supplies, shut-off valves, and trap outlet as necessary to conform to
roughing-in dimensions.
The trap can be installed in the drain line below or above the floor.
CAUTION: Risk of personal injury or product damage. Handle with care. Vitreous china can
break or chip if the bolts and nuts are overtightened, or if the product is handled carelessly.
Observe all local plumbing and building codes.
Prior to installation, unpack the faucet and drain and inspect it for damage. If the product is damaged,
please contact Kallista immediately at the phone number listed at the bottom of the page.
The bidet must be installed with 3/8” hot and cold shut-off valves.
Refer to the spec sheet for dimensional information.
Site preparation may require additional tools and hardware.
Kallista reserves the right to make revisions in the design of plumbing products without notice, as specified in
the Price Book.
