kaarta STENCIL 2, Quick Start Manual

Page: 1 / 2

Push once to power lidar on. (If LED ring does not
light or stay on, push button further in until it
latches.)
Turns Lidar on
Lidar Power Switch Functions
3XVKRQFHDJDLQWRWXUQOLGDUR΍0DNHVXUHEXWWRQ
unlatches.
Turns Lidar o ff
'XULQJ0DSSLQJ/RFDOL]DWLRQEOLQNLQJJUHHQRU
teal), press once to stop mapping. USB Indicator
VKRXOGEOLQN\HOORZZKLOHVDYLQJWKHSRLQWFORXG
Stops Mapping/Localization
Wait until USB Indicator turns blue before
restarting.
Restarts Mapping/Localization
Push button once to power Stencil on.
Once power has been applied to the lidar for more
than 60 seconds, press button again to start
0DSSLQJ/RFDOL]DWLRQ86%ΖQGLFDWRUVKRXOGWXUQ
solid green.
Turns Stencil on & Starts Mapping/Localization
Stencil Power/Mode Switch Functions
[ RIGHT BUTTON ] [ LEFT BUTTON ]
3UHVVWZLFHZLWKLQDVHFRQGWRWXUQ6WHQFLOR΍
Turns Stencil o ff
QUICK START GUIDE WHAT’S IN THE BOX?
STENCIL LAYOUT BUTTONS & PORTS
*Only three USB3 ports should be used
simultaneously. Use a USB3 hub in Port #3 or
Port #4 if more than three ports are needed.
Velodyne Lidar
Sensor
GNSS Bracket
Mounting Plate
Feature Tracker
Tripod Mounting
Plate
Air Exhaust Vents
HDMI Port #1
Ethernet (RJ-45)
Feature Tracker Cable Port / USB3 Port #1
HDMI Port #2
USB Status Indicator Port / USB3 Port #2
Power Input (Stencil AC Adapter Port)
Velodyne Inline Connector Port
Stencil
AC Charger
Kaarta USB
Documentation Drive
Apple iPad
with AC Charger
V-Mount Battery
(US Only)
Shipping Case
USB3 Port #3 USB3 Port #4*
Feature Tracker Cable
USB Status Indicator
Velodyne Inline Connector
Kaarta Warranty
Registration Card
Velodyne Declaration
of Conformity
WiFi Dongle
Battery Cable V-Mount
Battery Charger