![background image](http://html.mh-extra.com/html/jvc/rm-srx7020j/rm-srx7020j_operating_180369001.webp)
34
Operating JVC
’
s Audio/Video Components
You can use the remote control to operate other JVC
’
s
components.
Operating Audio Components
IMPORTANT:
To operate JVC
’
s audio components using this remote control:
•
You need to connect JVC
’
s audio components through the COMPU
LINK-4 (SYNCHRO) jacks (see page 31) in addition to the
connections using cables with RCA pin plugs (see page 7).
•
Aim the remote control directly at the remote sensor on the receiver.
•
If you use the buttons on the front panel, the remote control will not
operate that source. To operate a source with the remote control,
the source must be selected using source selecting buttons on the
remote control.
•
To operate the cassette deck or CD recorder using the COMPU
LINK remote control system, set the source name correctly. (See
page 11.)
•
Refer also to the manuals supplied with your audio components.
Sound Adjustment
You can always use the following buttons:
SURROUND ON/OFF
: Turn on or off the Surround modes.
SURROUND MODE
: Select the Surround modes.
After pressing SOUND, you can use the following buttons for sound
adjustment:
SUB/
–
: Adjust the subwoofer output level.
/
–
: Adjust the center speaker output level.
REAR
•
L +/
–
: Adjust the left rear speaker output level.
REAR
•
R +/
–
: Adjust the right rear speaker output level.
EFFECT
: Select the DAP effect level.
TEST
: Turn on or off the test tone output.
Note:
After adjusting sounds, press the corresponding source selecting
button or CONTROL to operate your target source by using the 10
keys; otherwise, the 10 keys cannot be used for operating your target
source.
Tuner
You can always use the following buttons:
FM/AM
: Alternate between FM and AM.
After pressing FM/AM, you can use the following buttons for tuner
operations:
1
–
10, +10
: Select a preset channel number directly.
•
For channel number 5, press 5.
•
For channel number 15, press +10, then 5.
•
For channel number 20, press +10, then 10.
/
–
: Tune into stations.
FM MODE
: Change the FM reception mode.
CONTROL
+
−
+
−
+
−
2
3
1
5
6
4
8
9
7/P
0
+10
10
BASS BOOST
EFFECT
MENU
ENTER
TEST
DIMMER
MUTING
CH
TV VOL
/REW
FF/
VOLUME
CATV/DBS
CONTROL
TV/VIDEO
REC
TUNING
PAUSE
RETURN
FM MODE
100+
CONTROL
A/V CONTROL RECEIVER
RM-SRX7020J REMOTE CONTROL
CATV/DBS
VCR
TV
AUDIO
SURROUND
MODE
INPUT
ON/OFF
DVD MULTI
DVD
CD
TAPE/CDR
TREBLE
TV/DBS
VCR
PHONO
FM/AM
BASS
SURROUND
ANALOG/DIGITAL
SLEEP
+
−
–
SUB
–
REAR
•
R +
–
REAR
•
L +
–
−
−
+
+
SOUND
When you press one of the following buttons, the remote
control operation mode appears on the display window.
A/V CONTROL RECEIVER
Ex.: When you press CD.
Buttons on the Remote Control
Remote Control Operation Mode
FM/AM
TUNER
CD
CD
PHONO
PHONO
TAPE/CDR
TAPE
DVD
DVD
DVD MULTI
DVD
TV/DBS
TV
VCR
VCR
CATV/DBS CONTROL
DBS
CONTROL
VCR or TAPE or CDDSC
SOUND
SOUND
EN30-42.RX-7020V[J]f
01.12.27, 3:37 PM
34