background image

• Cassettes marked “VHS” (or “S-VHS”) can be used with this video

cassette recorder. However, S-VHS recording is not possible with
this model.

• This model is equipped with SQPB (S-VHS QUASI PLAYBACK)

that makes it possible to play back S-VHS recordings with
regular VHS resolution.

• HQ VHS is compatible with existing VHS equipment.
• As an Energy Star® Partner, JVC has determined that this

product or product model meets the Energy Star® guidelines for
energy efficiency.

VIDEO CASSETTE RECORDER

HR-A590U

INSTRUCTIONS

LPT0662-001A
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.

Printed in Thailand

Dear Customer,

Thank you for purchasing the JVC VHS video cassette recorder.
Before use, please read the safety information and precautions to
ensure safe use of your new VCR.

CAUTIONS

WARNING

:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.

CAUTION:

This video cassette recorder should be used with AC 120V~, 60Hz
only.
To prevent electric shocks and fire hazards, DO NOT use any other
power source.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME
LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.

CAUTION:

Changes or modifications not approved by JVC could void user’s
authority to operate the equipment.

Failure to heed the following precautions may result in damage
to the VCR, Remote or video cassette.

1 DO NOT place the VCR . . .

...in an environment prone to extreme temperatures or humidity.
...in direct sunlight.
...in a dusty environment.
...in an environment where strong magnetic fields are generated.
...on a surface that is unstable or subject to vibration.

2. DO NOT block the VCR’s ventilation openings.
3. DO NOT place heavy objects on the VCR or on the Remote.
4. DO NOT place anything which might spill on the top of the VCR

or on the Remote.

5. AVOID violent shocks to the VCR during transport.

For Customer Use:

Enter below the Model No. and Serial No. which are located
on the rear of cabinet. Retain this information for future
reference.
Model No.
Serial No.

The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

4F21901A

K

01/12

 4F21901AE  Cov-07

16/01/2002, 18:54

1

Summary of Contents for HR-A590U

















Reviews: