JVC 1001MKV*UN*SN Instructions Manual Download

Page: 1 / 32

INSTRUCTIONS

ENGLISH

LYT0868-001B

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
(factory-preset).

• Available when the Power Switch

is set to “

” or “

”.

• Performing any operation during the demonstration stops the demonstration temporarily. If no operation

is performed for more than 1 minute after that, the demonstration will resume.

• “DEMO MODE” remains “ON” even if the camcorder power is turned off.
• To cancel Automatic Demonstration, set the Power Switch

to “

” and press the MENU Wheel

while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not
have to go through the main Menu Screen). Rotate the MENU Wheel

to select “OFF” and press it.

NOTES:

• When a tape whose Erase Protection tab is in the position that allows recording is loaded in the

camcorder, demonstration is not available.

• If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration

activated on the LCD monitor* or viewfinder.

* Applicable models only.

Dear Customer,

Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
“PRECAUTIONS” (

pg. 3, 4) to ensure safe use of this product.

A/EA

Printed in Japan
1001MKV

®Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD.

COMPACT VHS CAMCORDER

GR-SXM78EA
GR-SXM48EA
GR-SXM780A
GR-SXM480A
GR-SXM280A
GR-SXM180A
GR-SX140A

VHS
PAL

625

Summary of Contents for 1001MKVUNSN

































Search results

Summary of Contents for 1001MKVUNSN

Reviews:

Related manuals for 1001MKVUNSN

Brands by name

Popular brands

JVC 1001MKV*UN*SN, Instructions Manual

Search results

Summary of Contents for 1001MKV*UN*SN

Reviews:

Related manuals for 1001MKV*UN*SN

Brands by name

Popular brands

JVC 1001MKVUNSN, Instructions Manual

Summary of Contents for 1001MKVUNSN

Related manuals for 1001MKVUNSN