![background image](http://html.mh-extra.com/html/jupiter-sports/engraving-system/engraving-system_manual_2033818001.webp)
Jupiter Sports Manual
New Engraver 2012
Included in the Jupiter Sports Engraver Package
1. Jupiter Sports Engraving System
2. 2 power plugs
3. Wireless Keyboard with trackpad with Thumb Drive (on bottom of keyboard)
4. Templates (if standard)
Included in the Monitor Package (if requested)
1. Flat screen monitor
2. 1 power plug and 1 serial adaptor
SETTING UP YOUR ENGRAVER, MONITOR, and KEYBOARD
Make sure to put your boxes in a safe place for keeping. If any shipping needs to occur for these items you MUST ship in the original
packaging or there will be a $250 charge
The ENGRAVER
Plug in the
2
power plugs from the engraver into wall outlet or power strip
- left side of engraver - regular 3 prong power supply
- back of engraver - Universal AC Adaptor (MAKE SURE IT IS SET TO 24V)
The MONITOR
Plug in the power cord into wall outlet or power strip
Connect the Serial cord from back of Monitor to the Serial outlet (blue) on the back of the Jupiter
Sports Engraving System
The WIRELESS KEYBOARD WITH TRACKPAD
Put the batteries supplied into the bottom of the keyboard
Remove the Thumb Drive supplied on the bottom of the keyboard and put it into any USB slot on the
back of the Jupiter Sports Engraving System
You are now setup to run the engraver
IMPORTANT NOTE: The Jupiter Sports Engraver runs off of a thumb drive in the unit - it does
take a minute to go through the boot up process. Thank you for being patient.
Contact Information
Office: (561) 741-4612
Engraver and Engraving Questions and Issues
Heather (401) 206-9120
Product Reorder
Carmella Smith
(561) 741-4612
JS Engraver Manual 2013