Presence detector universal
Light Management
Presence detector universal
Art. No. PMU 360 WW
Presence detector universal
Art. No. PMU 360 AL
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
The load is not electrically isolated from the mains even when the device is switched off.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
Do not press on the sensor window. Device can be damaged.
The device is not suitable for use as a burglar alarm or other alarm.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Brightness sensor
(2) Sensor window
(3) Decor ring
(4) Up insert
(5) LED
(6) Adjuster
time
, run-on time
(7) Adjuster
lux
, Brightness
1/8
82542823
J:0082542823
18.09.2012
