background image

Instruction Manual

Aircraft Type

      Hybrid 

Hover 

Drone

Materials:

 

      PP 

and 

EPP 

foam

Width (Diagonal Shaft to Shaft):

 

   3.94” 

(100mm)

Total Width:

 

      6.5” 

(165mm)

Total Length:

 

      6.5” 

(165mm)

Height: 

      2.17” 

(55mm)

Weight:

       1.34 

oz.(38g)

Motors:

       7mm 

coreless 

(4)

Charger:

 

      Micro 

USB 

charge 

cord

Internal Battery:

 

     3.7V 

300mAh 

(non-replaceable)

Transmitter:

 

      4-channel, 

2.4GHz

Flight Times:

 

      Over 

minutes 

in 

drone 

mode 

        Up 

to 

12 

minutes 

in 

hover 

mode

Specifications

Summary of Contents for FLIGHT LAB TOYS HOVER CROSS FHT1001

Page 1: ...t 3 94 100mm Total Width 6 5 165mm Total Length 6 5 165mm Height 2 17 55mm Weight 1 34 oz 38g Motors 7mm coreless 4 Charger Micro USB charge cord Internal Battery 3 7V 300mAh non replaceable Transmitter 4 channel 2 4GHz Flight Times Over 6 minutes in drone mode Up to 12 minutes in hover mode Specifications ...

Page 2: ...amage to electronics Never place any portion of the model in your mouth as choking could cause serious injury Never operate your transmitter with low transmitter batteries and do not mix new and used batteries Batteries should be recycled or disposed of per state and local guidelines Always keep transmitter powered on while aircraft is powered Always keep aircraft in sight and under control WARNIN...

Page 3: ...craft until the LED lights begin blinking Move the left stick up for one beep and all the way down until you hear another beep The transmitter is now paired with the HoverCross and the red LED s will stop flashing In hover mode press the Auto Take Off Land button or move the left stick up and the Hover Cross will begin to move forward To take off in drone mode press the Auto Take Off Land button a...

Page 4: ... HoverCross It is important to use this process after a crash or whenever you find the unit is flying erratically First turn on the transmitter Then place the HoverCross on a level surface in hover mode Press the On Off button to turn on the unit and then pair with the transmitter Move both transmitter sticks to the outside bottom simultaneously as shown in the diagram The red LED s will flash qui...

Reviews: