![background image](http://html.mh-extra.com/html/johnson-plastics-plus/jp700/jp700_operating-instructions_2025131001.webp)
April-22
JP700/JP450 Operating Instructions
JP450 | JP700
INSTRUCTIONS
These mugs presses are designed to operate with a low “idle” temperature, a “maximum”
temperature and a countdown timer.
Follow these steps to set up your new mug press:
1.
Make sure the power cord is pushed in completely on the back of the Control Box.
2.
Make sure the cord from the heating blanket is pushed in tight and the metal collar is screwed
in completely.
3.
Turn on the mug press by flipping the green switch on the side of the Control Box. The timer
on the front panel should count backwards from 4 to 0 and an increasing temperature should
display on the screen, and the “F” (Fahrenheit) light should be on.
4.
Press the MODE button once to set the “Idle” temperature. The SET light should illuminate also.
Use the left and right arrows to decrease or increase the setting for your product.