![background image](http://html1.mh-extra.com/html/johnson-controls/wnc1800/wnc1800_quick-start-manual_2024170001.webp)
© 2017 Johnson Controls.
European Single Point of Contact: NA/SA Single Point of Contact:
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
APAC Single Point of Contact:
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 22 BLOCK D NEW DISTRICT
WUXI JIANGSU PROVINCE 214142
CHINA
WNC Gateway
The WNC Gateway is used in conjunction with a
ZFR1820 or ZFR1823 coordinator radio to create a wire-
less field bus using the ZFR Pro wireless protocol. It also
acts as a web server that leverages the power of mobile
connectivity to maximize productivity for daily operations.
•
Commission, configure, and access building automa-
tion equipment using Wi-Fi-enabled devices such as
smartphones, tablets, and laptops.
•
Change and configure setpoints, parameters, and
schedules. View alarms and trends through an
HTML5 browser-based interface.
IMPORTANT:
Keep your WNC Gateway in the sta-
tionary cradle with which it shipped. This may help
protect the unit if it is dropped.
IMPORTANT:
Save this guide. It contains default
Username and Password information that may be
needed to reset your WNC Gateway to factory
defaults.
QUICK START GUIDE
WNC1800 Wireless
Network Coordinator
Gateway
WNC Gateway Network Setup
To setup the WNC Gateway Network:
a.
In the WNC Gateway UI, navigate to
WNC > Net-
work Setup
.
b.
Set Routing to
Enabled.
c.
Assign a site-unique BACNet Device Object Identi-
fier.
d.
Assign a site-unique Wireless Field Bus Network
address
e.
Enter
True
for Commit Changes and Reset.
Use the WNC Gateway
Use the web pages from the WNC Gateway to
view, commission, and configure devices as needed.
•
7
8
Part No. 24-10737-105, Rev. A
(Barcode for factory use only.)