Transfer Files to PC
Transfer logs from the LogMan II to the LogView PC as follows. Note that
logs are automatically deleted from the LogMan II after transfer to the PC.
Step
Action
1
Place the LogMan II in the docking station and verify that the
USB cable is connected to the docking station and the PC.
2
Start LogView.
3
Select the drive where you store log files from the
Select
Archive Drive
dropdown list on the left side of the LogView
window.
4
Open (double-click) the folder in which to save the log files in
the
Select Archive Path
list box.
5
Select
Retrieve
>
Psion Link
from the LogView menu. The
Psion Link
dialog opens.
6
Select
LOGMAN II
from the
DEVICE
dropdown list in the
Psion
Link
dialog.
7
Select
Copy Logs - PC< -
from the
Command
dropdown list.
Click
Execute
.
8
When the
STATUS
line reads
Copy Finished
, click
Close.
For More Information
For more information, please see the LogMan II User Manual included on
the CD-ROM. To contact Johnson Controls about this product, please visit
our website at
www.myrefcon.com
.
Getting Started
LogMan II
Revision 1.0
Description
The LogMan II is a portable device for
the retrieval and transfer to PC of
refriger- ated container data for cargo
handling
verification
and
documentation.
The LogMan II is fully supported by the
LogView application and works with all
major reefer controllers.
The unit is simple to use and ruggedly
built to withstand the hard environment
of container terminals and shipboard
transport.
In addition to log retrieval, the LogMan
II allows the user to:
•
Set controller date and time
•
Set container (or genset) ID
•
Set container trip start date
•
Store load and discharge ports
•
Enter temperature probe correction
values
•
Store a container comment
•
Calibrate temperature probes
•
Update controller firmware
•
View genset fuel level, set tank size
and low-fuel warning level
