model
ACC-WIFI
Installation Instructions
Return thermostat to its position on the backplate on the wall.
Upon successful detection of the Wi-Fi Key, this screen will appear.
Press
NO
to return to the home screen.
Press
YES
to proceed to step 4.
The thermostat will scan for all
available networks. Select the
appropriate network from the
list on the display.
With the thermostat off the wall, insert the
Skyport Wi-Fi Key
all the way into the
SD slot of the Touch Screen Thermostat.
The ‘cut corner’ of the Key’s circuit board faces
up as shown in figure 1.
A locking retainer clip is included to maintain the integrity of the electrical connection. Additionally,
for extra security, the locking clip helps prevent unauthorized removal of the Skyport Wi-Fi Key.
Please note that the Locking Retainer Clip along with the Skyport Wi-Fi Key will have to be removed
temporarily to insert an SD memory card.
Please refer to the steps below for installation of the Locking Clip.
Install the Locking
Clip as shown in
figure 2.
The Locking Clip is seated
all the way down next to the
circuit board as shown in
figure 3. Reinstall the
thermostat on the backplate.
