1
1
1
3
1
5
2
5
4
8
3
6
2
7
3
8 3
2
5
5
4
Tools required
Fitting Instructions
Please keep for future reference
Should any component be missing, please call the Customer Care Department on
0330 005 2233.
Pack Content
Please read these instructions carefully and check the contents of the pack before attempting to
assemble and fi x this product.
Safety Recommendation
Only use a Step Ladder to install this product.
DO NOT over reach. Always move the Step Ladder so that you are in a safe working position.
DO NOT hold or lean on the pole to support your weight.
We recommend you use two people for installation of larger poles.
Take care when using power tools, use of a Residual Current Device (RCD) is recommended.
Always use eye protection when drilling. Beware of hidden pipe runs and cables.
No liability will be accepted for damage or injury caused by incorrectly installed or assembled product.
PLEASE KEEP OUT OF THE REACH OF YOUNG CHILDREN. SMALL PARTS - CHOKING HAZARD
PLEASE KEEP THESE INSTRUCTIONS AND THE BATCH CODE ON THE PACKAGING FOR FUTURE
REFERENCE IN CASE OF ANY QUERIES
SWISH DESIGN STUDIO BAY KIT
Bay Length
Parts
300cm
500cm
1
Pole
4
4
2
End/Centre Bracket
3
3
3
Pass Over Bracket
4
4
4
Standard Collar
2
2
5
Solid Ring
4
4
6
Pass Over Ring
26
46
7
Joiner
1
1
8
Bay Corner
2
2
6139L/ISS2
6454L/ISS4
3
6
5
2
3
1
3
2
4
1
3
2
6
6
1
5
stud drawing.AI 3 01/04/2014 09:19:22
OR
3
6
5
2
3
1
3
2
4
1
3
2
6
6
1
5
7
{
SWISH ELEMENTS BAY KIT
Bay Length
400cm
1 Bay Corner
2
2 End/Centre Bracket
3
3 Pass Over Bracket
4
4 Pass Over Ring
36
5 Solid Ring
4
6 Pole
3
7 Finial
2
6454L/ISS4
