OPERATING INSTRUCTIONS
SMPS-300
PLEASE READ THIS OPERATING MANUAL
COMPLETELY BEFORE OPERATING THIS UNIT AND
RETAIN THIS BOOKLET FOR FUTURE REFERENCE
COMPLIANCE WITH FCC REGULATIONS
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful Interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures :
#
Reorientate or relocate the receiving antenna.
#
Increase the separation between the equipment and
receiver.
#
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
#
Consult the dealer or an experienced radio technician
for help.
Please refer to the instructions on the enclosed warranty
card for returning your unit for service. When returning the
unit, please remove batteries to prevent damage to the unit
in transit and/or from possible battery leakage. We are not
responsible for batteries returned with the product or for the
cost of replacement.
Distributed by:
Spectra Merchandising International, Inc.
Chicago Industry Tech Park
4230 North Normandy Avenue
Chicago, IL60634, U.S.A.
Please have model number ready, for Customer Service,
call 1-800-777-5331
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
U N A U T H O R I Z E D M O D I F I C A T I O N S T O T H I S
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Printed in China
SERVICE
FEATURES
- A high quality portable speaker system with a built-in
power amplifier
- State of the art design
- Compact size and easy to operate
- Sensational sound effects
- Line-in cord compartment included for easy cable
storage.
- Features a power indicator bar when speaker is ON.
- Compatible with most digital audio players including Mp3,
iPods, CD Players, Notebook computers....etc.
- Can be powered by 4 AA (UM-3) batteries (not included)
or a DC 5V/1A adaptor (not included).
- Open the battery cover.
- Follow the polarity instructions inside to install 4 new AA
(UM-3)batteries (not included).
- Replace the cover.
- Remove the line-in connector cord from the storage
compartment (see drawing) and plug the cord into the
headphone jack of your digital audio player.
- Turn on the unit and adjust the volume by pressing the “
or “ buttons.
- The default volume setting is maximum. In order to avoid
an instant burst of loud music, always adjust your digital
audio player’s volume to mid-range prior to attaching the
speakers.
REMARKS:
- For best performance and longer playing time we suggest
using an AC power adaptor (not included) to power the
unit.
- Do not expose the speaker system to temperature or
humidity extremes, direct sunlight or excessive dust.
- Place the speaker system on a stable, level surface. Do
not drop or apply excessive force to the controls or place
heavy objects on top of the speaker.
- Although the speakers are shielded, keep magnetic
storage media (disks and tapes) at least 4 inches (10 cm)
from the speaker system in order to avoid data loss.
- To prevent the risk of an electric shock, do not try to
remove the shielded covers. There are no user
serviceable parts inside this unit.
- To reduce the risk of an electric shock using the adaptor,
do not expose this speaker system to rain or moisture.
”
”
NOTE:
- Please use a high quality, regulated AC power adaptor
(not included) with an output voltage of 5VDC/1A. ( )
to power the unit for longer periods of time.
- For best performance, set the EQ (Equalizer) on your
digital audio player to NORMAL or OFF when you first use
this unit. You can then adjust it accordingly while your
digital audio player is on and playing.
BATTERY INSTALLATION
CONTROL LOCATIONS
OPERATION
Volume UP
button
ON/OFF
button
Volume
DOWN
button
Left
speaker
POWER
indicator
Right
speaker
Battery
compartment
DC jack
Line-in
cord
storage
compartment
