Device Overview
How to wear your Advantage HR Smart Watch?
Attach your Advantage HR Smart Watch to
your wrist
1
2
3
4
Charge your Advantage HR Smart Watch
Fasten your Advantage HR Smart Watch
with the metal clasp
Change the watch band
Put on the watch band with the screen facing up and the band
wrapped around your wrist. Align the metal fastening buttons
along the band to find the best fit and snap the buttons in to
secure the band.
To charge your Advantage HR Smart Watch, place it in the charging cradle at the
other end of the USB cable and plug your USB cable into your PC USB port or
similar electrical source. It is very important to make sure that the metallic
charging contact on BOTH the watch and charging cradle are aligned
to each other. Press down slightly on the watch and once the battery meter is
displayed to confirm that is charging carefully close the lid of the charging
cradle. The battery meter will not be displayed at all times to save power- To
check on the charging status just pick up the watch/cradle so that the battery
meter can be displayed again. Initial charging time is approximately 2 hours.
Slide the end of the strap through the loop, and slide the loop
anywhere you like alongside the strap. The two metal
fastening buttons are removable and can be relocated to
any other holes on the strap as you prefer.
To change the watch band, please consult a watch dealer for
assistance on choosing the right size of watch band. Make sure
the replacement band comes with the following measurements:
Width: ≤ 20.5mm
Thickness: ≤ 3.1mm
User Manual
EN
Jarv Advantage HR Smart Watch + T Heart Rate
For warranty
information
,
troubleshooting
or other
customer service
needs please visit
www.jarvmobile.com
Register your product online at www.jarvmobile.com to
receive a free 6 month warranty extension
Wristband
Clasp
Core
Button
Optical Sensor
Metallic contact for charging
20.5mm
3.1mm
**IMPORTANT:
Make sure
BOTH watch and charging
cradle are properly aligned,
then slightly press down
