background image

1.

  To reduce the risk of electric shock, this lamp has a 

polarized plug (one blade is wider than the other ). 

The plug will fit in a polarized outlet only one way.  If the 

plug does not fit fully into the outlet, reverse the plug. 

If plug still does not fit, contact a qualified electrician.  

Never use an extension cord unless the plug can be 

fully inserted. Do not alter the plug.

2

. Do not install non-factory wiring or any other electrical 

components. Altering or modifying the lamp in any way 

will 

render the product unsafe.

3.

Avoid laying objects directly over the power supply cord 

to avoid cutting or damaging the wire. 

4

.  Keep curtains, shades, wall hangings and all other fabrics 

and objects away from the lamp shade, light switch and 

the light bulb. Lamps are not designed to support 

additional weight. Do not hang any objects from the 

lamp or any lamp part.

5.

Place the lamp on a stable, level surface in an area 

where the lamp will not be tipped over or bumped.

BULB REPLACEMENT 

1.

Turn  off  and  unplug  the  lamp  and  allow  bulb  to  cool

before replacing bulb.   

 

 

2.

Light bulb  should never touch the lamp shade.  

  CLEANING AND MAINTENANCE 

1.

To clean: use a soft, dry cloth only. 

2.

Do not use chemical or abrasive cleaning solutions.

This lamp is approved for indoor use only.

 DO NOT EXCEED RECOMMENDED BULB WATTAGE. 

Made in China

  For Customer Assistance:

www.jalexanderhome.com

Read and Save:

6.

ASSEMBLY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

MODEL #: JAE307

JAE307 -T20 (LED bulb included) 

FLOOR LAMP  

E

F

G

H

1. 

Place 

the base (A) on a flat surface, gently pull 

    additional cord from the base (A).

  

    

     

2. Insert and thread the tube (B) into the base (A) by 

    turning clockwise until secure.  

3. Insert and thread the tube (C) into the tube (B) by 

    turning clockwise until secure. 

4. Insert and thread the tube (D) into the tube (C) by 

    turning clockwise until secure. 

    

5. Insert and thread the socket assembly (E) into the 

    tube (D) by turning clockwise until secure. 

            

6. Install the light bulb into the socket assembly (E).

7. 

Pinch and insert the harp (F) into the harp fittings on 

    the socket assembly (E). Slide the caps on the harp (F) 

    over the fittings on the socket assembly (E) to secure.

8

. Remove the finial (H) from the harp (F).

9. 

Place the shade (G) on the harp (F) and secure with 

    the finial (H).

10. 

Insert the plug into an electrical outlet.

11. Use the rotary switch on the socket assembly (E) to 

adjust the light from low, medium, high, and off intensity.

Use one 150 Watt maximum, Type A,  3-Way bulb or LED 

equivalent bulb.

Reviews: