M-2100-1: JBE-2100 Manual Call Point data sheet V1.0
Jade Bird Fire Alarm Systems – JadeBird.eu.com 1 / 4 JBE-2100.DSH.EN.210128
Overview
JBE-2100 is an addressable manual call point (MCP) designed to operate on
a loop of intelligent fire detection and alarm devices with the JBE loop
protocol. This MCP sends fire alarm signals to the fire panel when the
resettable element is pressed as defined in the European norm EN 54-11.
After activation, the MCP will remain in alarm until it is reset with the
supplied reset key. There is no glass break element in this device, so the reset
operation is done without the need to replace any element.
The JBE-2100 also features a pair of normally open clean contacts, which
close at activation. These can be optionally used for a local action or to
provide an activation signal to third party systems.
