background image

Parts & Maintenance Manual

Ersatzteil- und Wartungshandbuch

When Performance Matters.

GB

DE

German

19

17

18

13

6

5

9

15

16

7

8

10

4

3

11

1 - INCLUDES ITEMS 3 - 16

ACHTUNG

Wenn diese Maschine nicht ordnungsgemäß verwendet wird, können ernsthafte
Verletzungen verursacht werden. Personen, die diese Maschine verwenden und warten,
müssen in ihrer richtigen Verwendung ausgebildet sein, auf die Gefahren aufmerksam
gemacht worden sein und die Anleitung ganz gelesen haben, bevor sie versuchen,
die Maschine aufzustellen, zu bedienen, einzustellen oder zu warten.

WARNING

If incorrectly used, this machine can cause severe injury. Those who use
and maintain this machine should be trained in its proper use, warned of its
dangers and should read the entire manual before attempting to set up,
operate, adjust or service the machine

Super LF 1880™ Fairway Mower with ROPS
Super LF 1880™ Mäher Fairway mit ROPS

67955 – Kubota D1105-E3B, 2WD
67956 – Kubota D1105-E3B, 4WD
67957 – Kubota D1105-T-E3B, 4WD

4160164-DE

Summary of Contents for Super LF 1880





















































































































































Reviews: