background image

Technical Manual
Tekninen käyttöopas

When Performance Matters.

GB

 FI

Finnish

VAROITUS

Laitteen virheellinen käyttö voi aiheuttaa vakavia vahinkoja. Laitteen
käyttäjille ja huoltajille on opetettava laitteen asianmukainen käyttö, heitä on
varoitettava mahdollisista vaaroista ja heidän on luettava koko käyttöopas
ennen laitteen valmistelua, käyttöä, säätämistä ja huoltamista.

WARNING

If incorrectly used, this machine can cause severe injury. Those who use
and maintain this machine should be trained in its proper use, warned of its
dangers and should read the entire manual before attempting to set up,
operate, adjust or service the machine

Eclipse

InCommand

63300 –  Eclipse 118, 18” 11 Blade Reel, Gen-Set

63313 –  Eclipse 118, 18” 11 Blade Reel, Battery Pack

63301 –  Eclipse 118F, Floating 18” 11 Blade Reel, Gen-Set

63314 –  Eclipse 118F, Floating 18” 11 Blade Reel, Battery Pack

63302 –  Eclipse 122, 22” 11 Blade Reel, Gen-Set

63311 –  Eclipse 122, 22” 11 Blade Reel, Battery Pack

63303 –  Eclipse 122F, Floating 22” 11 Blade Reel, Gen-Set

63312 –  Eclipse 122F, Floating 22” 11 Blade Reel, Battery Pack

63304 –  Eclipse 126, 26” 7 Blade Reel, Gen-Set

63315 –  Eclipse 126, 26” 7 Blade Reel, Battery Pack

63300 –  Eclipse 118, 457 mm:n 11-teräinen kela, yleisasetus

63313 –  Eclipse 118, 457 mm:n 11-teräinen kela, akkuyksikkö

63301 –  Eclipse 118F, kelluva 457 mm:n 11-teräinen kela, yleisasetus

63314 –  Eclipse 118F, kelluva 457 mm:n 11-teräinen kela, akkuyksikkö

63302 –  Eclipse 122, 559 mm:n 11-teräinen kela, yleisasetus

63311 –  Eclipse 122, 559 mm:n 11-teräinen kela, akkuyksikkö

63303 –  Eclipse 122F, kelluva 559 mm:n 11-teräinen kela, yleisasetus

63312 –  Eclipse 122F, kelluva 559 mm:n 11-teräinen kela, akkuyksikkö

63304 –  Eclipse 126, 660 mm:n 7-teräinen kela, yleisasetus

63315 –  Eclipse 126, 660 mm:n 7-teräinen kela, akkuyksikkö

 4170162-FI-Rev 

B

Summary of Contents for 63300

















































































































































Reviews: