![background image](http://html.mh-extra.com/html/jabsco/18510-0010/18510-0010_user-manual_628183001.webp)
Model 18510-0010
COMMERCIAL DUTY
“CENTRI PUPPY”
Bronze Centrifugal DC Motor/Pump Unit
FEATURES
Body & Impeller
Bronze
Seal
Carbon/Ceramic with Buna N
Port Size
3/4” NPT Internal
Motor
12 Volt DC Permanent Magnet,
Fully Enclosed, Ignition Protected
Shaft
Stainless Steel
Weight
8 lb, (3,6 kg) approx.
Motor meets USCG Electrical Standards (Title 33,
Chapter I, Part 183; Subpart I) for IGNITION PROTEC-
TION on gasoline powered vessels.
PERFORMANCE
(Nominal 12 Vdc System)
*FUSE/
FEET OF
AMPS
BREAKER
PSI
WATER GPM
21
25
open
open
25
18
25
4.3
10
20
17
25
5.2
12
18
16
25
6.0
14
15
13
25
6.9
16
13
3
25
9.0
18
Shut-off
Model 18510-0010
APPLICATION
Suited for many general pumping applications where a
flooded intake condition exists. This pump is NOT SELF-
PRIMING. Typical uses include diesel fuel transfer (NOT
GASOLINE), feed pump for spraying systems, irrigation,
cooling systems for dairy, watering stock, washdowns,
vehicle heating systems, machinery cooling systems
and cutting saw blade cooling.
INSTALLATION
The pump must be mounted in a dry location -the motor
is not waterproof and must not be submerged. The unit
can be mounted in any desired position. It is best mount-
ed so that water dripping from loose port connection will
not wet the motor. The pump head may be mounted at
90 degree increments on the motor to allow mounting as
needed.
* Customer supplied, not included with pump.
WARNING
!
Explosion hazard. Do not pump
gasoline, solvents, thinners or other
flammable liquids. To do so can cause
an explosion resulting in injury or death.
Explosion hazard. Do not operate with
rivets removed from motor case.
Explosion resulting in personal injury,
death or property damage can occur.
Case openings must be sealed to avoid
explosion and maintain ignition
protected rating.
WARNING
!