![background image](http://html1.mh-extra.com/html/iquatics/bio-phos-reactor/bio-phos-reactor_quick-start-manual_2089931001.webp)
Ensure that the pump inlet and impellor are regularly
cleaned and kept free from debris.
The Reactor itself can be emptied and the centre
pipe carefully lifted out, complete with the bottom
plate and nozzles.
There are two plastic screws underneath the bottom
plate, which when removed, will disassemble the
jets to allow for thorough cleaning. When reassem-
bling, the screws only need to be finger tight.
MAINTENANCE
All plastic parts should be cleaned with fresh water only.
Q. What If clogging occurs?
A.
This can be down to lack of flow, please
adjust the pump until you get a satisfactory
flow. Check that sponges are not clogged.
Q. I’ve adjusted the pump but
things still don’t seem correct?
A.
Be carefull not to add/use to much media,
the pump supplied is sufficently strong
enough to adequately run this reactor, if you
are finding it not powerful enough you have
probably added a little too much media.
COMPANY REG 06954492 | VAT REG 978518363
WWW.IQUATICS.CO.UK
WE HOPE YOU ENJOY YOUR NEW IQUATICS REACTOR
Bio Phos
Reactor
TROUBLE SHOOTING