1
TELESCOPING I.V. ROD KIT
Assembly, Installation and Operating Instructions
Kit No. 1110154
SAVE THESE INSTRUCTIONS
NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact
Carrier/ Dealer for further instruction.
SAFETY SUMMARY
To ensure the safe installation and adjustment of the Telescoping I.V. Rod Kit,
these instructions MUST be followed:
GENERAL WARNINGS
DO NOT install or use this equipment without first reading and understand-
ing this instruction sheet. If you are unable to understand the Warnings,
Cautions or Instructions, contact a healthcare professional, dealer or techni-
cal personnel before attempting to install this equipment otherwise, injury
or damage may occur.
DO NOT pull/push the wheelchair by the I.V. rod assembly. Injury to the
assistant/occupant and/or damage to the I.V. rod assembly may occur.
DO NOT place any objects on the I.V. rod assembly other than those deter-
mined by a healthcare professional.
INSTALLATION WARNING
After any adjustments, repair or service and BEFORE use, make sure all
attaching hardware is securely tightened otherwise injury or damage may
result.
This kit contains the following items:
DESCRIPTION
QUANTITY
Telescoping Tube
1
Short Hex Screw
1
Small Locknut
1
Long Hex Screw
1
Large Locknut
1
Adjustment Knob
1
Support Bracket
1
Washer
1
NOTE: The I.V. Rod can be installed to either the right or left side of the wheelchair. The right side
installation is shown in all figures. The left side installs in a similar manner.
