6.
From Inexa Control,
click on the home icon
and then
click
Network Explorer.
5.
Launch INEXA Control 2.1.1 program
1.
Ensure your 3DR Solo is running the latest 3DR officially
released software and firmware. This is done via following
manufacturer’s instructions to update using the 3DR Solo app
or via the Solo command line interface.
3.
Follow manufacturer’s instructions to power up and calibrate
3DR Solo including instructions displayed on the Controller
4.
Connect your Inexa Control PC to the 3DR Solo Wi-Fi:
Quick-Start Guide for
3DR® Solo® Quadcopter
2.
Follow manufacturer’s guide to power up the controller.
MINIMUM REQUIREMENTS
REQUIRED RESOURCES
Windows 7 Professional (64-bit), Service Pack 1;
Windows 10 Pro (64-bit)
INEXA™ Control Software Installed and licensed
Unmanned Vehicle Plugin for ArduCopter
Processor: Quad Core, 2.2 GHz, 6MB Cache
ArduCopter Simulation Plugin
Memory: 4GB DDR3 1600 MHz
Graphics Card: 1GB GDDR5 Dedicated Memory
DirectX 11.0
3DR Solo with latest 3DR Officially released software and
firmware
Dedicated Wireless Network Interface Card (for Solo)
Storage: 64 GB
Display Resolution: 1280 x 1024 at 96 DPI
Online Map Service: Broadband Internet Connection separate
from vehicle specific communication hardware requirements
Offline Map Service: ESRI ArcMap 10.1; Broadband Internet
Connection for creation of offline maps from online sources
within INEXA Control
