PACKAGE CONTENTS
• USB to Ethernet Adapter
• Driver
CD
•
Quick Setup Guide
SYSTEM REQUIREMENTS
• Windows
10®
OR
Mac OS 10.12, Mac OS 10.13, Mac OS, 10.14, or Mac OS 10.15
• Available USB port
Use this adapter to connect to a 1000 Mbps network from the USB
3.0 port on your desktop or laptop computer.
SETTING UP THE ADAPTER
Note
: The driver software must be installed before you connect the adapter.
The adapter does not need to be connected for the software to install.
Windows 10 has a built-in driver. It allows you to use the adapter’s basic
functions without installing the drivers. For other situations, you may need
to install the drivers.
To install on a Windows PC:
Note:
If your computer does not have a disc drive, you can download the
driver from www.insigniaproducts.com. Search for your model number
(NS-PU98635) to find the driver on the product page. Or, attach an external
disc drive to your computer.
1
Insert the driver CD into your computer’s optical drive. The
installation wizard should open.
Note:
If the wizard does not run automatically, locate and double-click
Run.exe
on the driver CD.
2
Click on your operating system, then follow the on-screen
instructions.
Before using your new product, please read these instructions to prevent any damage.
RTUNICv1.0.8.pkg
RTUNICv1.0.8
RTUNICv1.0.8
3
When installation is complete, click
Finish
, then restart your
computer.
4
Connect the USB connector on the adapter to an open USB port on
your computer.
5
Connect a network cable to the Ethernet port on the adapter.
To install on a Mac:
1
Insert the driver CD into your computer’s disc drive.
2
In the
Finder
, select
RTUNICv1.0.8
under
DEVICES
, then open
RTUNICv1.0.8.pkg
. The driver setup wizard opens.
QUICK SETUP GUIDE
USB 3.0 to Gigabit
Ethernet Adapter
NS-PU98635/NS-PU98635-C
