Scan
button
Lightning™
connector
Screen
Car adapter
Frequency tuner
Memory preset button
SETTING UP YOUR TRANSMITTER
1
Plug the car adapter into your vehicle’s cigarette lighter
receptacle. Your transmitter turns on.
2
Set the desired volume level on your iOS device.
Note
: Volume level cannot be adjusted once your iOS device has
been plugged into the Lightning connector.
3
Connect the Lightning connector to your iPhone, iPad, or iPod.
TUNING YOUR TRANSMITTER
You can tune your transmitter manually, automatically, or with
saved presets.
PACKAGE CONTENTS
• FM
transmitter
•
Quick Setup Guide
FEATURES
• Lightning™ connector works with your iPhone, iPad,
and iPod
• Plays music from your iPhone, iPad, or iPod on your
car’s FM radio
• Auto-scan quickly finds unused stations
• Buttons easily control your transmitter
Before using your new product, please read these instructions to prevent any damage.
Manually tuning your transmitter
1
Tune your vehicle’s radio to a weak or unused FM frequency.
You should hear static.
2
Press and hold
M
(on the transmitter), then press
–
or
+
to
tune your transmitter to the same frequency as your radio.
The frequency is shown on the screen.
Automatically tuning your transmitter
1
Press and hold
Scan
. Your transmitter automatically selects
a weak or unused frequency.
2
Tune your radio to the same frequency as your transmitter
(read the frequency off the display screen).
Using memory presets
• Press
the
or
button to choose a previously saved
memory preset. See “SAVING MEMORY PRESETS” for more
information.
SAVING MEMORY PRESETS
1
Press
or
button to the Memory Preset you want (M1,
M2, M3).
2
Press
M
to enter manual tuning mode and see the Memory
number flashing.
3
Press
or
button to tune the transmitter to the
frequency that you want to save.
4
Press
M
to save the frequency to the corresponding number.
QUICK SETUP GUIDE
FM Transmitter with
Lightning™ Connector
NS-MA5FMT / NS-MA5FMT-C / NS-MA5FMT2-C
