![background image](http://html.mh-extra.com/html/innovi/sw-520/sw-520_user-manual_2064120001.webp)
DC12V/AC24V Dual Voltage (optional)
Compatible for DC12V and AC24V voltage, which can shift to the correct
mode as per the power input.
Auto D/N shift mode
Adopt color mode in day, because the light is enough in day; at night the
illumination is lower which need higher sensitivity and better image
quality, so it change to B/W mode automatically.
Ultra Wide Dynamic Range
The captured wide dynamic range is 102dB typical and can reach
120dB maximum.
High Effective Resolution
Image resolution as high as 690TVL-E, offering enhanced
horizontaland vertical resolution useable in existing as well as new
CCTV systems.
Low illumination working capability
0.1Lux low illumination(IR OFF), 0Lux low illumination(IR ON)
OSD Menu
Powerful OSD menu operation function, allows for setting of
various functions.
“
SEAWOLF
”
Image Sensor
This camera adopts innovative DPS(Digital Pixel System) image sensor
and image processing technology. The sensor picks up details from each
pixel based on hundreds of samples per video frame. vs CCD's limited
exposures, to ensure wider dynamic range than is possible with analog
CCD. The image quality is even brilliant under extreme lighting conditions.
3D Noise Eliminating Technology
Adopts Pixim fully digitalized 3D noise reduction technology to
minimize noise, extending DVR storage by 30%+.
Long-life IR Light Source Design
Adopts high performance IR LED
and heat balance design, effectivelye
xtends the service life of LED.
ULTRA
WDR
(
IR
)
DOME
CAMERA
USER
'
S
MANUAL
1. Use the appropriate power.
The input power for the camera is DC12V/AC24 . Be sure to
connect it to the appropriate power. Wrong connection may cause
malfunction and/or damage to the camera.
2. Do not attempt to disassemble the camera.
To avoid electric shock, do not remove screws or camera housing.
There are no user serviceable partsinside. Ask a qualified service
person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera
could be damaged by improper handling or storage.
4. Do not expose the camera to rain or moisture, or try to operate it
in wet areas. Do not place the camera in the following locations:
①
Locations where temperature is lower than -10
℃
or higher than 50
℃
;
②
Locations where humidity is higher than 95%;
③
Locations where there are large amounts of water vapor and steam.
5. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is
hard to remove. Use a mild detergent and wipe gently.
6. Clean the
sensor
faceplate with care.
When cleaning the
sensor
panel, do not use strong or abrasive detergents.
Use a piece of lens tissue or cotton tipped applicator and ethanol.
7. Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely
bright objects that cause smear to appear irrespective of whether
the camera is operating or not. This can damage the
sensor.
8. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless
communication device which emits strong electromagnetic field,
some irregularity such as noise on monitor screen may happen.
The series Ultra WDR cameras are new CCTV cameras which adopt
Pixim's innovative nsor chip based on Digital Pixel System ogy. The
resolution is up to 690TVL-E and the industry-leading wide dynamic
range is up to 120dB. This WDR ensures brilliant image quality under
any lighting environment. The image and color quality is also excellent
in low illumination environments. This camera series is an ultra wide
dynamic range camera in the real sense using digital sampling which
can't be paralleled by average wide dynamic range cameras using older
generation CCD imagers. The application of 3D-DNR (digital noise
reduction) technology ensures higher S/N, which efficiently reduces the
digital storage and transmission data saving system cost. Fashionable
and professional exterior design , makes round-the-clock surveillance
easy and convenient.
SW-520
SW-520C
1
3
4
2
7
8
1. Dome Housing: to protect lens and camera body.
2. Lens.
3. Three-dimensional bracket base : used to adjust camera angle.
4. Bracket: for wall mounting.
5. IR Transmitting Components.
6. OSD Button: menu button.
7. Zoom Adjusting Lever: to adjust lens focal length.
8. Focus Adjusting Lever: to adjust lens focus.
3
5
6