ROYAL ENTRANCE II WITH DECK
Step Shell
Sand
15 lbs
Sand
(not included)
A
Contents of the Accessories box #2020-HRK
x2
x2
x4
x2
x8 x8
(2
½
IN.)
x12
x2
x2
x2
x16
x2
x2
(2
¾ IN
.)
(3
¼ IN
.)
(1
½
IN.)
(¾ IN.)
x2
x2
(3
IN
.)
x2
2)
Align the light cover's two alignment rods into the small holes at the top of
the larger hole. Insert the light cover by pressing firmly.
Light cover
Required tools
(not included)
Phillips #2
Phillips #3
SCREW KIT 140-0070
A B
C
D
E F G H
I
J
REV. 03/09/2020 PN:
PG:1
2257 route 139
Drummondville, Québec
J2A 2G2
1 year on pool step.
1 year on hardware.
MANUFACTURER WARRANTY
WWW.INNOVAPLAS.COM
* View step cups installation tips on YouTube:
https://www.youtube.com/watch?v=W5RH1VNxpu0
1)
Insert the two Step Cups
TM
in the holes under the step.*
A2)
With a flat screwdriver, compress
the Step Cup mushroom ring while
pushing it into the hole.
A1)
Insert half of the Step Cup mushroom
ring in the hole, at a 45 degree angle.
A3)
Twist the Step Cup to ensure that
the mushroom ring has entirely cleared
the wall thickness. If it has, the suction
cup should rotate freely.
Phillips bit
7/16 wrench
WARNING
Install the step on a flat surface.
Do not jump or dive from the step.
Remove the step from water when temperatures drop below freezing.
In winter, the step should be stored in an area protected from snow.
Never lift the step by its handrails.
Use BATTERY operated tools to avoid electric shock near water.
Ensure no corrosive materials are added to the step or harware kit.
The step must be installed per manufacturer’s instructions.
File off all stripped or sharp edges before assembly to avoid injuries
and liner damage.
The manufacturer is not responsible for damages or injuries caused
by improper installation or use of product.
To ease the installation of handrails and bolts, use a screwdriver to
line up the holes.
CAUTION
Failing to install the Step Cup
TM
system will greatly
reduce the steadiness of the step and will void the
manufacturer warranty.
