![background image](http://html.mh-extra.com/html/infinite-peripherals/infinea-x-ix-i2dbtr-ph5-wh/infinea-x-ix-i2dbtr-ph5-wh_quick-start-manual_2055634001.webp)
QUICK START GUIDE
*Also available in black
INFINEA
®
X
1
2
3
6
5
4
9
4
8
1
2
3
4
5
6
7
FRONT SPEAKER
iOS ON/OFF BUTTON
SCAN BUTTON
STATUS LEDs
SPEAKER TOGGLE BUTTON
1.
2.
3.
4.
5.
MICROPHONE
HOME BUTTON
BATTERY STATUS BUTTON
VOLUME BUTTONS
6.
7.
8.
9.
iOS CAMERA OPENING
BARCODE SCANNER
RFID ANTENNA
BATTERY PACK
BATTERY LATCH
1.
2.
3.
4.
5.
REAR SPEAKER
6.
ABOUT YOUR INFINEA
X
ASSEMBLY
Secure the cover by inserting
(6) torx screws. Do not over
tighten screws.
3
Close the top cover, being careful
not to pinch the wires, while
maintaining the position of the
protective rubber bumper.
2
1
Open the Infinea X by loosening the
torx screws and gently flipping open
the top cover. Slide the iOS product
onto the Lightning™ Connector and
audio jack until it clicks into place.
CAUTION:
Please take care that the rubber bumper is properly aligned between the top and bottom covers. Failure to do so will compromise the liquid protection
features of the Infinea X. If you have any questions about installation of the rubber bumper, please contact your sales representative.
Lightning™ Connector
Audio Jack