Incredible Technologies Golden Tee PGA TOUR Install Manual Download

Page: 1 / 29

Golden Tee

PGA TOUR

Edition

Version 5/22

Page 1

Golden Tee PGA TOUR Edition

Professional Stand Kit Install Guide

CONTENTS

Contents ........................................................................................................................................................... 1

PGA Tour Cabinet Components ........................................................................................................................ 2

Leg Leveler Adjustment .................................................................................................................................... 2

Warnings and Notices ....................................................................................................................................... 3

Professional Stand Install Guide ....................................................................................................................... 6

Professional Stand

– Hardware Parts ............................................................................................................... 7

– Tubing Assembly (Supports) .................................................................................................................... 8

– Tubing Assembly (Extensions) ................................................................................................................. 9

– Monitor Stand Brace ................................................................................................................................. 10

– Tubing Sub Assembly (Overview) ............................................................................................................. 11

– Tubing Sub Assembly (Mounting Brackets) ............................................................................................ 12

– Tubing Sub Assembly (Upper Mounting Brackets) .................................................................................. 13

– Attach Sub Assembly to Assembly Extensions ....................................................................................... 14

– Sub Assembly (Lower Brace) ................................................................................................................. 15

– Marquee & Shroud (Front) ...................................................................................................................... 16

– Marquee & Shroud (Rear) ...................................................................................................................... 17

– Cable Feeds ............................................................................................................................................. 18

– Monitor Hanging Brackets ...................................................................................................................... 19

– Monitor Mount Plate - Standard .............................................................................................................. 20

– Monitor Mount Plate - Alternate .............................................................................................................. 21

– Monitor Mount Plate - Long .................................................................................................................... 22

– Hang Monitor ......................................................................................................................................... 23

– Side Panel Assembly ................................................................................................................................ 24

– Center Cover Assembly ............................................................................................................................ 25

– Center Cover Positioning .......................................................................................................................... 26

– Control Panel.......................................................................................................................................... 27

System Box Connections ................................................................................................................................ 28

Video Connections for HDTV .......................................................................................................................... 28

General Cabinet Maintenance......................................................................................................................... 29

Care and Cleaning of Rubber Bumper ............................................................................................................ 29

Titan Air Filter ................................................................................................................................................. 29

Care and Cleaning of Cooling Fans and Vents ............................................................................................... 29

Trackball Maintenance ................................................................................................................................... 29

NOTE

PLEASE RETAIN ORIGINAL SHIPPING BOX FOR SERVICE AND REPAIR.

Some game features will not be available if the unit is not properly registered to ITNet.

Summary of Contents for Golden Tee PGA TOUR






























Search results

Summary of Contents for Golden Tee PGA TOUR

Reviews:

Related manuals for Golden Tee PGA TOUR

Brands by name

Popular brands

Incredible Technologies Golden Tee PGA TOUR, Install Manual

Search results

Summary of Contents for Golden Tee PGA TOUR

Reviews:

Related manuals for Golden Tee PGA TOUR

Brands by name

Popular brands