INBIKE 528 Bike Computer Instruction
Fuctions
SPD
Speed
ODO Total cycling distance
DST
One-pass cycling distance
MXS
Maximum speed
AVS
Average speed
TM
One-pass cycling time
CLK
Clock
SCAN
Automatic Cycleplay
BACKLIGHT
SW
Stop-watch
CDD
Count-down distance
CDT
Count-down time
CAL
Consumed calorie
FAT
Consumed fat
TEM
Temperture
Alter For power shortage
Power saving
‘+’& ‘-‘ Speed comparing
Upkeep reminding
KM/hr M/hr setting
Wheel perimeter setting
Total distance initial value setting
Cycling date sampling
Automotive wake-up
Installation of Battery
Open the battery lid with a coin. Put in a 3V CR2032 Battery. ( Positive pole upwards)
Installation of inductor & Magnet
Install the Inductor on the front fork ( Same side as the magnet),Fix the inductor with the
complimentary armor tape, twine the wire on the handlebar.(Fix with armor
tape) ,Adjust the position between the magnet and inductor, make the distance around
1.5mm.(The closer ,the Better) .When fix the magnet, never let the magnet towards the
centre of inductor, make the magnet towards to the upside or downside of the inductor.
Installation of the computer base
Fix with the armor tape
