background image

INSTRUCTION MANUAL 

Micro-computer based digital indicating controller          TP40A 

 

 

To prevent accidents arising from the misuse of this controller, please ensure the operator using it receives 
this manual. 

 

 

Caution

 

• This instrument should be used according to the specifications described in the manual. 

If it is not used according to the specifications, it may malfunction or cause fire. 

• Be sure to follow the warnings, cautions and notices. If not, it could cause serious injury or malfunction. 
• Specifications of the TP40A and the contents of this instruction manual are subject to change 

without notice. 

• This instrument is designed to be installed in a control panel. If not, measures must be taken to ensure 

that the operator cannot touch power terminals or other high voltage sections.   

• Be sure to turn the power supplied to the instrument OFF before cleaning this instrument. 
• Use a soft and dry cloth when cleaning the instrument. 
  (If paint thinner is used, it might deform or tarnish the unit.) 
• As the display section is vulnerable, do not strike or scratch it with a hard object. 
• Any unauthorized transfer or copying of this document, in part or in whole, is prohibited. 

• IMO Precision Controls Limited is not liable for any damages or secondary damages incurred as a result 

of using this product, including any indirect damages. 

 

1. Name 

   1.1 Model name 

                          TP40A                                , 

Series name: TP40A (W48 x H48 x D96.5mm) 

R   

 

 

Relay contact: 1a 

S   

 

 

Non-contact voltage (for SSR drive): 12

+2

  0

V DC 

A   

 

 

DC current: 4 to 20mA DC 

OUT1 

V   

 

 

DC voltage, 0 – 10 VDC 

Input 

M   

 

Multi-range   *2 

 

A2 

Alarm 2 (A2)   *1 

 

W (5A) 

CT rated current: 5A 

 W 

(10A) 

Heater burnout alarm 

CT rated current: 10A 

 DT 

OUT2 

(Heating/Cooling 

  

control output) 

Non-contact relay 
 

 

C5 

Serial communication (RS-485) 

 

SM 

SV1/SV2 external selection 

Option 

 

LA 

Loop break alarm 

*1: Alarm actions (9 types and No alarm action) and Energized/Deenergized can be selected by key   

operation. 

*2: Thermocouple, RTD, DC current, and DC voltage can be selected by key operation. 
*3: 100 to 240V AC is standard specification for the supply voltage. However, when ordering please 
  specify 240AC for 100-240AC supply or 24DC for 24VAC/DC. 

 

 

 

 

 

 

 

 

 

Summary of Contents for TP40A





















Reviews: