About the IE-MiniMc
The IE-M
MiniMc
Series of
Industrial Ethernet,
miniature media converters
features 10/100
switching copper-to-fiber conversion, plug-
and-play operation, and a miniature size and
complies with the IEEE 802.3af Power over
Ethernet standard. In addition,
IE-MiniMc
also
includes an extended voltage range; an
extended operating temperature; and DIN
clips for mounting the enclosure on a DIN-rail.
Installing the IE-MiniMc
IE-MiniMc
installs virtually anywhere: as a standalone, table-top device or
on a DIN-rail.
As a standalone device, install
IE-MiniMC
in locations with extremely lim-
ited space. You can also use the included velcro strips to attach the device
to most surfaces.
1
8
19772 Pauling • Foothill Ranch, CA 92610-2611 USA
TEL: (949) 465-3000 • FAX: (949) 465-3020
www.imcnetworks.com
© 2005 IMC Networks. All rights reserved.
The information in this document is subject to change without notice. IMC Networks assumes no responsibility for any
errors that may appear in this document.
IE-M
MiniMc is a
trademark of IMC Networks. Other brands or product names may
be trademarks and are the property of their respective companies.
Document Number 55-80722-00 A0
June 2005
Questions or Comments about this manual? Contact
Visit
www.mediaconverter.com
for a complete overview of media
conversion products available from IMC Networks.
Networks
IE-MiniMc
Installation
Guide
Q U I C K S T A R T
Introduction
1
Installation
1
DIN-Rail Mounint
2
Powering the Unit and PoE
2
DC Wiring
2
IE-Mini Operation
3
LED Operation
4
Safety Certifications
6
Warranty
6
