Controls
Power/Pairing
Indicator Light
Power/Pair/Play/
Pause/Answer
Press and hold for 7 sec.
to turn the unit on
and begin pairing.
Press and hold to turn
the unit On or Off.
Press to play or pause
an audio track.
Press to answer an
incoming call.
Volume −/+
Skip Rev/Fwd
Press to skip ahead or
back an audio track.
Press and hold to set
the volume level.
Charging the Battery
Requires a Micro-USB to USB cable (included). Charge fully before use.
1. Using a
Micro-USB to USB
cable (included), connect to the USB port of a
powered on computer or USB power adaptor (not included) to charge the unit.
Be sure the computer is not in sleep mode.
LED Indicators
STATUS
INDICATOR
Power On
Flashing blue light
Low Battery
Flashing red light
Charging
Solid red light
Charging Complete
No light
Pairing
Flashing red and blue lights
Pairing a Bluetooth Device
1. Simultaneously power on the unit and begin the pairing process by pressing
and holding the
Power/Pair button
for approximately
7 seconds.
The indicator
will flash red and blue.
When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, select the
IAKB45
in your
Bluetooth settings to pair. If your device requests a password, enter the
default password 0 0 0 0 . Refer to the user’s manual for your specific device for
instructions on pairing and connecting Bluetooth devices.
3. When successfully paired, the
Pairing Indicator will turn solid
and an audible
chime will sound through the speakers.
After initial pairing, the unit will stay paired unless unpaired manually by the user
or erased due to a reset of the device. If your device should become unpaired or you
find it is unable to connect, repeat the above steps.
WARNINGS AND PRECAUTIONS
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or
disposed of according to state and local guidelines. They should never be disposed of in normal
household waste, and they should never be incinerated, as they might explode. Contact your local
government for disposal or recycling practices in your area.
• To avoid hearing damage, make sure that the volume on your music player is turned down before
connecting your speakers. After placing speakers in / on your ears, gradually turn up the volume
until you reach a comfortable listening level.
FCC WARNINGS
• Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Features
• Supports Bluetooth
• Built-in microphone
• DC battery power: built-in
rechargeable lithium ion
battery
• Battery life: approx. 3 hours
Includes
• Micro-USB port for battery
recharge
• Removable electronics for easy
cleaning
WARNING:
This product can expose you to chemicals including lead, which is
known to the State of California to cause cancer. For more information go to:
www.P65Warnings.ca.gov
IAKB45-ALL-01-IB-EN - FD.indd 1-7
5/19/2017 4:57:02 PM
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
