iBT810 - Instruction Sheet - English
Color: Black text on white paper (1C + 1C)
Size: 102 W x 150 H mm
Material: 85gsm wood free paper
Jan 13, 2020
CHARGING THE SPEAKER
CONTROLS OVERVIEW
iBT810_IS_011320-A
Printed in China
© 2020 SDI Technologies, Inc.
All rights reserved
Model: iBT810
For questions, full instructions, warranty, and additional
safety information, please scan the QR code or visit:
www.ihome.com/help/iBT810
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B) / NMB-3(B),
IC Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf,
utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
WARNING/DISPOSAL OF UNIT
Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To
dispose of the unit, follow the instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.
• Always dispose of used batteries/electronics in accordance with the prevailing community regulations.
• Many electronics retailers now recycle batteries and other electronic components at no charge
GENERAL BATTERY PRECAUTIONS
• Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic
substances.
• Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit).
• Never expose a battery to any liquid.
• Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated
vehicle where excessive internal temperatures may be encountered.
• Always keep batteries out of the reach of infants and small children.
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
1
Do not use this product near water, and clean only with dry cloth.
2 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
3 Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat.
4 Only use attachments/accessories specified by the manufacturer.
5 Unplug this product during lightning storms or when unused for long periods of time.
6 Damage Requiring Service – This product should be serviced by qualified service personnel when:
-
Plug has been damaged.
-
Objects have fallen into or liquid has been spilled into the enclosure.
-
The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
-
The unit exhibits a marked change in performance or does not operate normally.
7 No naked flame sources, such as lighted candles, should be placed on this product.
8 Attention should be drawn to the environmental aspects of battery disposal.
9 This product is suitable for use in tropical and/or moderate climates.
10 WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
11 Do not dispose of batteries in the household trash or fire.
12 CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
13. If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage.
14. Always use a UL/ETL certified charging adapter (not included), and the supplied USB charging cable.
POWER ON/OFF
-Press & hold to turn speaker ON
USB AC
adaptor
(not included)
USB charging
cable (included)
CHARGE UNIT
BEFORE USE
ABOUT 2 HOURS
LED STATUS INDICATORS
charging (slow flash)
fully charged
low battery (fast flash)
RED
OFF
RED
BLUETOOTH PAIRING
USB CHARGING PORT
PLAY/PAUSE
BOTTOM OF UNIT
TOP OF UNIT
LED INDICATORS
COLOR MODES
Press the
Color Mode Button
repeatedly
to cycle through different color modes:
Press and hold the
Color Mode Button
to
turn off colors. Press again to resume the
previous color mode used.
RESET BUTTON
Use the extended tip of a
paper clip or other thin tool
to push in the reset button
-Press & hold to enter pairing mode
-Select ‘iHome iBT810’ on your
device to connect
-To cancel pairing, press Blueooth
Button again
COLOR MODES
PLAY
GLOW MINI
Portable S LED Lighting
Slow Fade
Fast
One Color
Pulse to Music
OFF
pairing (flashing)
connected to Bluetooth
BLUE
BLUE
BLUETOOTH STATUS
BATTERY STATUS
-Red LED = Battery Status
-Blue LED = Bluetooth Status
-Short press to turn speaker OFF
