IVC-100/120-RS, PM-1056-4P QIG
PM-1056 Hardware Diagrams
PM-1056-4PG/4PGB
PM-1056-4P/PM-1056-4PB
w/o GPIO (CN1)
The driver program and operation of PM-1056-4P/4PB/4PG/4PGB and IVC-100/G are the same. PM-
1056-4P/4PB/4PG/4PGB is the interface of PCI/104.
PCI Signal Grouping Selection
x
SW1 (Rotary Switch): Group selection of PCI configuration for PCI/104 modules
Group
SW1 Position
0
0, 4
1
1, 5
2 2,
6
3 3,
7
x
Signal Grouping Description
Group PCICLK ID
Address INT0 INT1 REQ GNT
0
PCICLK0
IDSEL0
INTA
INTB
REQ0
GNT0
1
PCICLK1
IDSEL1
INTB
INTC
REQ1
GNT1
2 PCICLK2 IDSEL2 INTC
INTD
REQ2
GNT2
3 PCICLK3 IDSEL3 INTD
INTA
REQ3*
GNT3*
*Note: REQ3# and GNT#3 are not signals defined in PC/104-PLUS.
Do not use MODE3 if your card does not have these signals on PC/104-PLUS connector.
8
IVC-100/120-RS, PM-1056-4P QIG
4-Channel Video Capture Card with GPIO Module
IVC-100/200-RS
PM-1056-4P-RS
Quick Installation Guide
Version 2.0
May. 17, 2006
Package Contents
IVC-100/200 package includes the following items:
x
Video capture card x 1
x
CD x 1
x
Hard copy of user manual x 1
x
GPIO module: (for IVC-100G and IVC-200G only)
GPIO daughter board x 1, flat cable x 1, input connector x 1 and
output connector x 1
©2006 Copyright by IEI Technology Corp.
All rights reserved.
1
GPIO pin connector
4PORT Video output
connector
LED
Rotary Switch
Jumper
PC104PLUS
connector
