background image

SpiroTiger

®

, always a 

Breath ahead! 

Direct respiratory endurance training increases 
performance efficiency by a considerable amount. 
Alongside this the entire upper body including the 
sport dependent posture musculature is developed!  

SpiroTiger

®

 offers a complete and comprehensive 

training which takes all aspects of conditioning into 
view.

Convince yourself of the «Extra-Power» of  
SpiroTiger

®

 ! 

1. Starting 

Assembly

Place the pieces, as shown above, on the table.

1.  Place the valve piston 

1

 into the V-tube 

2

 as shown 

and secure it into place using the screw fastening 

3

 

(small opening).

2.  Place the V-tube 

2

 into the handheld device 

4

.

3.  Place the mouth tube 

5

 into the V-tube 

2

 and fasten 

it using the second screw fastening 

6

 (large opening). 

4.  Place the respiration bag 

7

 on the open end of the  

V-tube 

2

 and the mouthpiece 

8

 on the opening  

end of the mouth tube 

5

.

Turning on the SpiroTiger

®

 

device

 by pressing the 

ENTER key   for at least two seconds.

Turning off the SpiroTiger

®

 

device

 by pressing the 

ENTER key   for at least three seconds. 

If not used the device automatically shuts off after five 
minutes. 

Insertion of Batteries 

2. Set-up 

Entering training duration, respiration rate, and bag 
size.

After the device has been turned on press the   key until 
the desired symbol starts to blink.

  WATCH for training duration    

  FREQUENCY for respiration rate  

 

BAG for respiration bag size 

Select with the   and   keys the desired value and 
confirm it using the ENTER key  .

Setting ranges

• 

Training duration: 0 - 99 minutes

  0 (zero) equals no fixed training duration  

• 

Respiration rate: 15 - 60 breaths per minute 

  0 (zero) respiration rate means no given breathing 

pace. 

• 

Respiration bag size: 1.5 to 5.0 litre

  Respiration bags are labelled with their size. 

The 

respiration 

bag size has to be individually 

determined for every user. 

User‘s Quick Guide  

EN

Screw fastening 

with small opening

3

Individual

respiration bag

7

Handheld device 

4

Mouth tube

5

Mouthpiece

8

6

V-tube 

2

Valve piston

1

Screw fastening 

with large opening

Headquarters

Switzerland

:   idiag AG, Mülistrasse 18

   

CH-8320 Fehraltorf

   

Phone  +41 (0)44 908 58 58

   

Fax  

+41 (0)44 908 58 59

   

[email protected]     www.idiag.ch

Germany:  

idiag GmbH, Schaubingerstrasse 7

 

D-79713 Bad Säckingen

 

Phone  +49 (0)7761 933 83 63

 

Fax 

+49 (0)7761 933 83 62

 

[email protected]     www.idiag.de

ST

SMART

Reviews: