Wayne, NJ 07470
Made in China © 2020 Ideavillage
MTTITNMTRM091820MW
Care and Maintenance
Thank you for your purchase of the
MicroTouch® Titanium Trim™
.
Please read all instructions before you begin. For additional information
including how to videos, please visit www.TitaniumTrim.com.
• Turn the unit off before cleaning.
• Take off comb attachments.
• Turn your unit to the side so the MicroTouch® logo is facing up and toward you.
• Remove the blade by pressing your thumb against the blade edge and push away from the
unit (Image 13-14).
NOTE: Only one side of the blade is removable.
• Use included brush to remove any hair clippings from the main unit or around the blade.
You can also use the brush to remove hair clippings from in between the teeth of the
comb attachments.
• For excess hair clippings, the blade head (removed off the unit) and comb attachments can be
rinsed under running water and placed on a towel to dry.
• Be sure the blade head is completely dry before putting it back on.
• The handle can be cleaned with a damp cloth, do not submerge under water.
• After cleaning, align the springs between the clips on the unit and snap together
(Image 15-16).
How to Use MicroTouch® Titanium Trim™
Image 14
Image 13
Image 15
Image 16
Extendable Handle
• The unit handle extends to allow for greater reach when trimming hard to reach areas.
• Grab the handle of the unit, gently pulling on it until it locks into the extended position.
NOTE: If you pull too hard on the extendable handle, it will separate from the unit.
